Fall arrest is one of the most common worker safety hazards in construction. It’s also one of the most preventable hazards in all industries.
Construction workers are at risk for serious injury from falls on a regular basis, but it doesn’t have to be that way. There are steps you can take to protect your employees from this hazard and keep them safe on the job site:
-Use guardrails
-Install slip-resistant mats
-Use fall protection equipment
Purpose to get fall arrest equipment
The purpose of fall protection systems is to prevent workers from falling from heights by providing a means of support or restraint. Although there are many different types of fall protection systems available, fall arrest systems are among the most common and least expensive methods for protecting workers from falls.
Fall arrest systems typically include a body harness, with a lanyard attached to an anchorage point on the structure being worked on. The roof safety anchor points are usually made of nylon rope or webbing, which stretches slightly as weight is applied to it.
If a worker who is wearing an appropriately sized body harness falls more than 4 feet while wearing the system, their fall will be stopped by the lanyard and they will be prevented from falling any further.
Kinds of fall protection systems
There are several different types of fall protection systems, depending on how high the worker is above ground level. These include rope grabs, lanyards, and harnesses. When choosing which type of system to use, consider where you will be working and what kind of equipment you’ll need for your job.
Some examples include:
-Lanyards for workers who are more than 6 feet off the ground. They can be used in conjunction with other fall protection systems such as lifelines or rope grabs;
-Rope grabs for workers who are less than 6 feet off the ground;
-Harnesses if you’re working at heights greater than 6 feet but less than 20 feet off the ground;
-Lifelines if you’re working at heights greater than 20 feet but less than 50 feet off the ground;
-Personal Fall Arrest Systems if you’re working at heights greater than 50 feet but less than 100 feet off.
CONCLUSION
The system of fall arrest typically includes a body harness, with a lanyard attached to an anchorage point on the structure being worked on. The lanyard is usually made of nylon rope or webbing, which stretches slightly as weight is applied to it. For more information visit our Website.